Flexistrip (19m)
Flexistrip is the market leading load bearing security glazing strip used for installing double glazed units, laminated glass and single glass into windows and doors in exterior and interior situations. Combining superior performance, durability, security and ease of use with a neat and an instantly overpaintable finish, Flexistrip fulfils the many requirements of factory glaziers, site glaziers and specifiers. Market-leading load-bearing butyl security glazing tape. Tested to BS 6375 (weather tightness) and BS 7950 (security) as part of the B6 glazing systems.
Applications
Installing double glazed units and laminated glass into timber and steel windows and doors.
- Suitable for both non-drained and drained & ventilated frames
- Excellent finish – does not require capping
- Eliminates need for distance pieces – quick to apply
- Can be overcoated immediately with solvent / water borne paints and stains
- Immediate application onto coated timber – no special primers required
- Available in a wide variety of widths and sizes
- Superior load bearing characteristics – can accommodate wind loads up to 2000Pa when used in the B6 System
- Durable material – service life in excess of 20 years depending on conditions
- Enhanced security – suitable for use under Secured by Design Scheme when used in the B6 System
- Specify with confidence – the UK market leader
Properties
Application temperature range: +5°C to +30°C Shelf life: 24 months when stored flat in original packaging in cool, dry conditions.
Instructions
Surface preparation: All surfaces should be clean, dry and free from frost, grease and loose materials.
Application: Apply direct from the reel onto one surface and press sufficiently along its whole length to achieve good initial adhesion. Remove backing paper and offer other surface to the sealant and push firmly to seal across the joint.
