These specially designed, hand actuated cups operate on a pump system, and create a vacuum under their gripping pad section. The pump plunger has a red band to indicate suction level at all times. When it shows less than 100% vacuum left, simply pump the plunger until you reach the original vacuum pressure without removing the cup from the glass! To release, just depress a trigger on the opposite end of the handle from the plunger.

• Durable metal handle
• Fast attachment on smooth, non-porous flat surfaces
• Red-line indicator warns user of any vacuum loss
• Check valve allows re-pumping without loss of remaining vacuum
• Release valve lever permits quick, complete release
• Supplied with protective carrying case
• MAX LOAD CAPACITY 125lbs (57 kg)
• Max load capacity includes a 3:1 safety factor with certain conditions

The ABS polymer used in the pump and handle makes the Cup lightweight, strong, and rust-resistant. A red-line on the pump's plunger indicates the vacuum level. When the 8" (203 mm) diameter Cup is attached completely, the plunger is partially hidden inside the pump and the red-line is not visible. A visible red-line indicates vacuum is not sufficient for lifting. If the red-line starts to show during a lift, a check valve allows the user to re-pump the Vacuum Cup without losing the remaining vacuum. When the lift is completed, a release mechanism allows air to refill the evacuated space under the Vacuum Pad, so that release is complete..

• Lightweight, Heavy-Duty ABS Handle
• Check Valve Allows Re-Pumping without Loss of Remaining Vacuum
• Release Valve Lever Permits Quick and Complete Release
• Fast Attachment on Smooth, Non-porous Flat Surfaces
• Red-Line Indicator Warns User of Any Vacuum Loss
• Supplied with Protective Carrying Case
• Max load capacity 125lbs (57Kg)
• Max load capacity includes a 3:1 safety factor with certain conditions

Made with a combination of synthetic material and the high strength of lightweight aluminium, it has a powerful lifting capacity of 60 kg (132 lbs.). It's suitable for slightly curved or textured surfaces. The pad diameter is 4-1/2" (114 mm).

• Suitable for flat, slightly curved or textured surfaces
• Handle design allows for easy manoeuvring
• Lifting capacity 132lbs (60kg)

Plastic Double Pad Vacuum Lifter have high quality rubber pads that will adhere to any smooth non-porous surface. Pads measure 4-1/2" (114 mm) in diameter, and develop a strong vacuum for maximum lifting power. Individual lift tabs create suction when pulled down. To release you merely lift the tab upright. High strength body is made of a combination of synthetic materials

• Lightweight plastic body
• Two individually operated pads
• Lifting capacity 132lbs (60kg)

Tilting over the three levers of the Aluminium Triple Pad Vacuum Lifter produces a huge 100 kg lifting capacity. As with all aluminium vacuum lifters, the ergonomic designed handle remains comfortable even through long use. The durable metal construction and hard coating make it tough enough for everyday use and years of reliable service. The pad diameter is 4-1/2" (114 mm).

• Three suction pads individually operated
• Strong, lightweight aluminium
• Lifting capacity 220lbs (100kg)

This plastic-body Triple Pad Suction Lifter has three pads that operate individually. Pulling the individual tabs on the pads down creates the suction on the substrate. To release, the tabs are pulled to the upright position. The vacuum lifter can be used on almost any substrate. It has the load capacity of approximately 100 kg. (220 lbs.) The pad diameter is 114 mm (4-1/2") Moulded plastic body housing three 114 mm (4-1/2") lever operated pads. High strength body is made of a combination of synthetic materials.

• Lightweight plastic design
• Lifting capacity 220lbs (100kg)

This is among the best in the industry. It is the standard of the stained glass and glazing industry. It features a precision-ground carbide cutting wheel in a replaceable Cutting Head. Known for its long wheel life, this cutter was built to last, and make the cleanest scores in glass cutting today

• Straight end handles
• Cut type straight
• 140 degree hone angle

This is among the best in the industry. It is the standard of the stained glass and glazing industry. It features a precision-ground carbide cutting wheel in a replaceable Cutting Head. Known for its long wheel life, this cutter was built to last, and make the cleanest scores in glass cutting today

• Straight end handles
• Cut type straight
• 140 degree hone angle

Glass cutter for general cutting tasks, especially economical as wheels are exchangeable and turrets and cutting heads are nickel-plated · 6 cutting wheels made of stainless steel and tempered by a patented method guarantee high cutting quality and long service life

• Sold individually or boxed in 12 per box

These L-squares are manufactured from high-quality material. The integrated brace ensures especially high precision, but they can also be supplied without a brace

Available sizes

Traditional T-square in standard quality · flat run-off ensures cuts all the way to the edge of the glass · easy to use

Available sizes

Glass marking pencils sold in boxes of 12 pencils per box

Colours available

White
Yellow
Red
Blue
Black

Circle cutter with 6 wheel cutter

Available sizes

Single edge Industrial blades (Pack 100)

Measuring tape 5m metric and imperial measurements.  Positive lock button for ease of use

Merlin Lazer   A remarkably simple but effective precision measurement instrument it allows accurate measurement of glass and air-gap thickness in single, double and triple glazed units. Identifies laminated glass.  No glass removal necessary

Used for measuring the overall glass thickness of already installed glass panes and insulated glass. The device is suitable for measuring glass thicknesses of up to 120 mm. The device also features an integrated glass thickness gauge which offers the possibility of determining the thickness of single glass panes (from 2 – 25 mm).

Fleximeter is made of sturdy metal construction for easy measuring of all types of door and window units. Metal frame to maintain accuracy.

These popular Jaw Glass Pliers have a flat upper jaw that supports the top surface of the glass, while the humped lower jaw develops powerful leverage under slight pressure, and cleanly severs the glass at the cut line.

Also in 10" and offset

Pointix driver for use with diamond or triangular points. Used for sprigging in single glass or double glazed units quickly and efficiently without the breakages that can easily occur with manual sprigs and hammers. The points are simply inserted into the cartridge and secured by an adjustable tension bracket.

Pointix diamonds for use with a Pointix gun

Pointix triangles for use with a Pointix gun

Webbing, multi-functional for various uses in the glazing industry
2 sizes Medium and Heavy, both 2” wide the heavy one being thicker

The most common knife is the 1½ inch stiff putty knife as shown. There are a whole selection of knifes for particular jobs or for preference. These range from a hacking, 10 in 1, flexible putty knife, bent putty, and a Don Carlos (shown) to name a few that are available

Plastic handle mallet with a chrome plated zinc head. Fitted as standard with 2 screw in orange plastic faces. Other faces available on request

Leather Lifting Sling, each lifts up to approximately 85 kg and are sold individually. Strong heavy duty sling with hardwood handles and thick felt lining. Each sling approximately 1 metre from handle to handle.